How Do You Reset a Sharp TV?
While resetting signs you out of any apps on a smart TV and uninstalls any additional apps you have installed, it can often fix software-based issues that have developed. To reset a Sharp TV:
Go to “Settings” menu using your Sharp remote. Then select “System” followed by “Factory Reset”. Press the “Play” or “OK” button three times to engage the reset process.
If you own a Sharp Aquos LC-52D64U LCD TV, there are two methods you can facilitate a factory reset: on-screen and using the hardware directly. Try these steps for on-screen menu reset: For a hard reset:
What Do You Do if Your Sharp TV Won’t Turn On
If your Sharp TV won’t turn on, it could be because of a number of reasons, which include overheating and a burned-out bulb. Here is what you can do to try troubleshooting the problem:
How Do I Fix My TV When the Screen Goes Black?
There are several possible causes for a black TV screen:
Failure in the power supply board. Backlight issues. Problem with the TV panel. Loose connections. Sleep timer is activated.
If your TV screen goes black, try the following tips to fix the problem:
How Do I Fix the Blinking Light on My Sharp TV
Before trying any expensive physical repairs, run a full reset and updates. Start by running a power cycle reset:
Unplug the television and wait for a few minutes for the power to drain. Plug the TV directly into the wall to rule out a bad power strip. Turn the TV back on and check the light. If the light continues to blink, run a factory reset to delete stored data and return the TV to its original factory settings. If a full reset fails to fix the problem, you may be dealing with a hardware problem. You may need to have your TV analyzed by a professional or consider a replacement.
Why Does My Sharp TV Keep Flashing OPC?
Sharp TV systems use several lights to indicate activity and potential errors. Any blinking activity on the TV OPC (Optical Picture Control) light most likely indicates an error. Problems can arise from hardware issues or the firmware installed on the TV. If the TV doesn’t turn, the power lights are blinking or other issues arise while the Sharp TV OPC light is blinking, try to determine if the problem is hardware or firmware related. Feel the TV set for excessive heat. Excessive heat can indicate a faulty fan or another piece of hardware that is making the TV run without displaying the screen. If your TV is not overheating or making irregular noises, it may be a problem related to firmware or updates.
Sharp TV Error Codes and Their Meaning
How to Clear the Password on My Sharp TV
Sharp TV Turns On But No Picture
If your Sharp TV set turns on but it is not getting the picture;
Check to make sure that the connections to external equipment are correct. Make sure you have selected the correct input source. Make sure the antenna is properly connected. Check if “On” is selected in “Audio only”. If it is, turn it off. Verify that a non-compatible signal is not being input. Make sure the picture adjustment is correct.
How Do I Fix Sound on My Sharp TV?
There could be several reasons why you are experiencing audio problems with your Sharp TV. While some problems may be as a result of a genuine component failure, at which point the TV should be returned to the manufacturer for maintenance or replaced, most audio issues are due to incorrectly configured settings or the device not being plugged in. Try these troubleshooting instructions to resolve sound problems with your TV:
Check connections, volume and device settings. Examine the wire connections at the rear of the TV. If any audio or HDMI cables are loose, try securing them to see if the problem clears. If your TV continues to experience audio issues after basic troubleshooting and the problem wasn’t there on first use, consider resetting the TV to its default settings.
For audio issues with external devices connected to the TV, try the following troubleshooting steps:
Why Does the Brightness on My Sharp TV Increase and Decrease Constantly?
When Active contrast feature is on, it will automatically adjust the image contrast according to the brightness level in the scene that is displayed. To disable this feature;
In the menu guide, select the “Picture Settings” and select “Advanced” to locate and turn off the Active Contrast setting.
How to Turn Off OPC ON Sharp TV
To turn off OPC on Sharp TV, go into the “Picture Settings” located in the Menu guide and set the OPC feature to “Off.
How to Pair Sharp Aquos Remote with TV
Sharp TV Not Responding to Remote
If your Sharp TV is not responding to remote, it could be because of low batteries in the remote control. You also need to make sure you are pointing the remote at the TV. Another possible reason may be something blocking the TV remote sensor or its interfering with the signal. Check this too: TCL Roku TV Troubleshooting Guide To fix this problem, try the following troubleshooting instructions to see if it works:
Change the remote control batteries with new ones. With the new batteries installed, try pointing the remote at the TV and press the power button. Reset the TV by unplugging the TV power cord from the wall outlet. Then wait 5 minutes before plugging it back into the wall outlet. Ensure there is nothing interfering or blocking the beam when attempting to control the TV with the remote. Inspect the TV remote sensor and clean it to be free of dust or any other object that may be covering it. Turn off any external components near the TV that could be causing an interference with the remote signal. Ensure the TV software is up to date.
